POLYFOLD
AIR FILTERS
Send to a Friend    Printer Friendly   
Download Data Sheet

Polyfold Air Filters


Polyfold Air Filters
View Enlarged Image of Polyfold Air Filters

Polyfold industrial air filters are excellent for general purpose filtration where high dust-holding capacity and low resistance are important. Uni-Foam and Quadrafoam media are used for permanent, cleanable filter applications. Polyester media is used in disposable filter applications.

Applications
Each model is excellent for general purpose filtration in commercial and industrial applications where low resistance and high dust holding capacity are most important.

Model

Unifoam
Media
Thickness

Polyester
Media
Thickness

Frame
Thickness

3D CAD Model

PF-2525

.25 (25ppi)

 

1.88

Create & Download

PF-2550

.50 (25ppi)

 

1.88

Create & Download

PF-4525

.25 (45ppi)

 

1.88

Create & Download

PF-4550

.50 (45ppi)

 

1.88

Create & Download

PFPE-50

 

.50

1.88

Create & Download

PFPE-100

 

1.00

1.88

Create & Download


FILTRATION PERFORMANCE DATA

 

Polyfold Model
PFPE-50

 

UFM-50

 

.11

Initial Resistance
(in inches water gauge)

 

 

88

Average Synthetic
Dust Weight Arrestance
(percent)

Tests performed according to ASHRAE Standard 52.1 -1992
at 300 feet per minute face velocity.


Tolerances
Framed Filters +/-.06" length & width, +/-.03" thickness
Pad Filters +/-.12" length & width, +/-.06" thickness

Media
Uni-Foam and Quadrafoam media are used for permanent type cleanable filter applications, and polyester media is used when a disposable filter is most appropriate. After the media and the Uni-Grid support are bonded into one unit, they are mechanically formed into gently rolling pleats, with no areas of tension and minimum distortion. This produces an even flow of air throughout the entire extended area of the filter. Results are lower air flow resistance and a much greater dust holding capacity.  Uni-foam and Quadrafoam are available in various pores per inch (PPI) ranging from 10 through 60 PPI.

Standards & Classifications
UL 900 Class 2, UL 94 HF-1
Telcordia NEBS GR-78-CORE
Telcordia NEBS GR-63-CORE
FMVSS 302

Frame
Roll formed into a strong sturdy one-piece channel, using .040" thick, 3000 series aluminum. Frame is tightly fitted to filter media and fastened with two aluminum rivets. The UL listing, model number and air flow direction are roll imprinted into the frame. Part number is metal stamped into frame for quick, accurate identification. 

Uni-Grid Support
Expanded on our specially designed Uni-Grid equipment, using .040" thick, 3000 series aluminum. Uni-Grid expanded aluminum is approximately 85% open to lower resistance.
Click here to order your free made-to-spec prototype

View Accessories  |  View Filter Kits

 
 
 
Copyright © 2007 Universal Air Filter. All Rights Reserved